Twins System
Anibacterial Gold Hand Soap
MATERIAL SAFETY DATA SHEET
| HAZARD RATING | ||
| Fire=0 | 4=Extreme | |
| Reactivity=0 | 3=High | |
| Health=0 | 2=Moderate | |
| Special | 1=Slight | |
| 0=Insignificant |
N/A=
Not Applicable N.D.=No Data N.E.=Not EstablishedEMERENCY MEDICAL TELEPHONE NUMBER
1-800-228-5635 ext. 111
SECTION I-IDENTITY AND MANUFACTURER'S INFORMATION
PRO-LINKProduct Name: Pro-Link Antibacterial Hand Soap
Product Number: KH950
Prepared by Regulatory Affairs Department - 1/7/99
DOT Proper Shipping Name: Cleaning Compounds
Hazard Class: N/A
SECTION II-HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
|
Sodium Lauryl Sulfate CAS No 151-21-3 |
|||||
|
% |
OSHA PEL,ppm |
ACGIH TLV, ppm |
LC 50 ppm |
LD 50 mg/kg |
|
|
1 - 3 |
6mg/m3 |
7.5mg/m3 |
N.D |
RAT I 1720 |
|
SECTION III-PHYSICAL/CHEMICAL CHARACTERISTICS
| Boiling Point: 212*F (100*C) | Specific Gravity (H2O=1):1.0 |
| Vapor Pressure (mm Hg): 25 | Melting Point: N/A |
| Vapor Density (Air=1): 0.6 | Evaporation Rate (water=1):>1.0 |
| Solubility in Water: Complete | pH: 8.2 - 9.2 |
| Appearance and Odor: | Odor Threshold ppm:N/A |
| Clear Amber liquid, Citrus fragrance | H2O/Oil Distr. COEFF:> N/A |
SECTION IV-FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/ASECTION V-PHYSICAL HAZARDS
Stability: StableSECTION VI-HEALTH HAZARDS
Routes of Entry: __ Inhalation __ Skin X Eye X IngestionSECTION VII-PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken in Case Material is released or spilled: Absorb onto inert medium and collect in an approved container for proper disposal. Flush area with water to reduce possible slippery floor hazard.SECTION VIII-CONTROL MEASURES
Respiratory Protection: Not required.NOTICE: NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OR MERCHANTABILIY, FITNESS FOR A PARTICULAR PURPOSE, OR OF ANY OTHER NATURE, ARE MADE WITH RESPECT TO INFORMATION CONCERNING THE PRODUCT REFERRED TO IN THIS MATERIAL SAFETY DATA SHEET
. The goal of defining precisely, in measurable terms, every possible health effect that may occur in the workplace as a result of chemical exposures cannot realistically be accomplished. The information and recommendations contained n this Material Safety Data Sheet are supplied pursuant to 29 C.F.R. 1910. 1200 of the Occupational Safety and Health Standards Hazard Communications Rule. The information and recommendations set forth herein are presented in good faith and believed to be correct as of the date hereof. PRO-LINK, however, makes no representations as to the completeness or accuracy thereof, and information is supplied upon the express condition that the persons receiving the same will be required to make their own determination as to its suitability for their purposes prior to use. In no event will PRO-LINK be responsible for any damages of any nature whatsoever resulting from the use of, reliance upon, or the misuse of this information. The information as supplied herein is simply to be informative and intended solely to alert the user of the substance which is the subject matter of this Material Safety Data Sheet. The ultimate compliance with federal, state or local regulations concerning the use or disposal of this compound, or compliance with respect to product's liability, rests solely upon the purchaser thereof.