ICE MELTER ICE MELTER
MATERIAL SAFETY DATA SHEET
| HAZARD RATING | ||
| Fire=0 | 4=Extreme | |
| Reactivity=0 | 3=High | |
| Health=0 | 2=Moderate | |
| Special | 1=Slight | |
| 0=Insignificant |
N/A=
Not Applicable N.D.=No Data N.E.=Not EstablishedEMERENCY MEDICAL TELEPHONE NUMBER
1-800-228-5635 ext. 111
SECTION I-IDENTITY AND MANUFACTURER'S INFORMATION
PRO-LINKProduct Name: Pro-Link Ice Melter
Prepared by Regulatory Affairs Department - July 1994
SECTION II-HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
|
Calciumchloride CAS No 10043-52-4 |
|||||
|
% |
OSHA PEL,ppm |
ACGIH TLV, ppm |
other limits |
% optional |
|
|
N/E |
N/E |
N/E |
N/E |
N/E |
|
|
Sodium chloride CAS No 07647-14-5 |
|||||
|
% |
OSHA PEL,ppm |
ACGIH TLV, ppm |
other limits |
% optional |
|
|
N/E |
N/E |
N/E |
N/E |
N/E |
|
SECTION III-PHYSICAL/CHEMICAL CHARACTERISTICS
| Boiling Point: 175*C for CacI2 1413*C for NaCI | Specific Gravity (H2O=1):1.85 @ 25*C for CaCI2 2.16 for NaCI |
| Vapor Pressure (mm Hg): 0.37kPa (40*C) CacI2 1.0mm Hg (865*C) for NaCI |
Melting Point: 804*C for NaCI |
| Vapor Density (Air=1): N/A | Evaporation Rate (eather=1):>N/A |
| Solubility in Water: 97.7 g/100ML @0*C 1 g/2.8 ml @ 25*C | pH:Neutral to slightly alkaline for CaCI2 6.7 - 7.3 for NaCI |
| Appearance and Odor: | Freezing point: 176* for CaCI2 |
| solid, white to faint pink granular - orderless | Molecular weight: 110.99 for CaCI2 58.45 for NaCI |
SECTION IV-FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used): N/ASECTION V-PHYSICAL HAZARDS
Stability: StableSECTION VI-HEALTH HAZARDS
Routes of Entry: __ Inhalation X Skin X Ingestion X EyesSECTION VII-PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken in Case Material is released or spilled: Shovel up dry chemical and place in metal drum with cover, reuse if possible. Always wear personal protective equipment..SECTION VIII-CONTROL MEASURES
Respiratory Protection: For dusty conditions, wear NIOSH-approved dust respirator.NOTICE: NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OR MERCHANTABILIY, FITNESS FOR A PARTICULAR PURPOSE, OR OF ANY OTHER NATURE, ARE MADE WITH RESPECT TO INFORMATION CONCERNING THE PRODUCT REFERRED TO IN THIS MATERIAL SAFETY DATA SHEET
. The goal of defining precisely, in measurable terms, every possible health effect that may occur in the workplace as a result of chemical exposures cannot realistically be accomplished. The information and recommendations contained n this Material Safety Data Sheet are supplied pursuant to 29 C.F.R. 1910. 1200 of the Occupational Safety and Health Standards Hazard Communications Rule. The information and recommendations set forth herein are presented in good faith and believed to be correct as of the date hereof. PRO-LINK, however, makes no representations as to the completeness or accuracy thereof, and information is supplied upon the express condition that the persons receiving the same will be required to make their own determination as to its suitability for their purposes prior to use. In no event will PRO-LINK be responsible for any damages of any nature whatsoever resulting from the use of, reliance upon, or the misuse of this information. The information as supplied herein is simply to be informative and intended solely to alert the user of the substance which is the subject matter of this Material Safety Data Sheet. The ultimate compliance with federal, state or local regulations concerning the use or disposal of this compound, or compliance with respect to product's liability, rests solely upon the purchaser thereof.